carportable

• 9 Easy Steps!
• 1. Clip 2 x 2 Aluminium Telescopic tubes together and lay parallel, and join centre strap.
• 2. Extend each Telescopic tube, then slide each Aluminium tyre plate over each tube.
• 3. Insert the 4 diagonal fibre glass rods into each industrial strength nylon corner connector, and join using the round centre “puck”, then insert the 2 centre fibre glass rods into the same centre connector
• 4. Unroll the cover, and insert the end of the rod (x 2) into two corner connectors on the same side and clip to base.
• 5. Extend both “end” rods to the opposite side, and insert into the other corner connector and clip to base.
• 6. Now either drive a car into the dome and park each wheel on the plates, or lay the water filled bags over each plate.
• 7. Pull the 190T Polyurethane coated Polyester cover over the dome .
• 8. Fasten cover to base on both sides using the shock cord restraints.
• 9. Attach 4 nylon corner straps to the end of each outrigger and the cover, then tighten until the cover is taut.

howtoassemble

Follow these 9 simple steps to fully assemble & set up your Carportable in 10 - 12 minutes. A step by step User Guide with photos is supplied with each unit.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• click any image to enlarge...
•